Schlitz Produktionslinie (0,3 - 3,0) * 1600mm
Basisinformation
Modell: (0.3 -3.0)*1600mm
Produktbeschreibung
Spezifikationen 1.Highquality
2.CE Zertifikat
Preis 3.Best
4.Vollständiges sevice
(0,3 ~ 3,0) × 1600mm Schlitzlinie
1. Bestandteile:
Diese Linie umfasst Stütztisch, Spulenwagen, hydraulische Abwickler, Bogenführungsausrüstung, Nivelliersystem, Scherausrüstung, Auskleidungsausrüstung, Schlitzausrüstung, Spulenarm, elektrisches Steuerungssystem und Rückstoßausrüstung
2. Technische Parameter
3. Komponenten und Funktionen:
2.CE Zertifikat
Preis 3.Best
4.Vollständiges sevice
(0,3 ~ 3,0) × 1600mm Schlitzlinie
1. Bestandteile:
Diese Linie umfasst Stütztisch, Spulenwagen, hydraulische Abwickler, Bogenführungsausrüstung, Nivelliersystem, Scherausrüstung, Auskleidungsausrüstung, Schlitzausrüstung, Spulenarm, elektrisches Steuerungssystem und Rückstoßausrüstung
2. Technische Parameter
1 | Material specification | Galvanized or carbon steel sheet at stress235Mpa (33KSI) |
2 | Coil thickness | 0.3~3.0mm |
3 | Coil width | 500-1600mm |
4 | Coil inner diameter | 508~610mm |
5 | Coil out diameter | less then 2000mm |
6 | Max. coil weight | 30T |
7 | Product coil inner diameter | 508mm |
8 | Product coil out diameter | less then 1500mm |
9 | Product coil weight | 10T |
10 | Production speed | 0~120m/min |
11 | The slit width tolerance | ± 0.05mm at thickness 0.5~1.0mm |
± 0.1mm at thickness 1.1~2.0 mm | ||
± 0.15mm at thickness 2.1~3.0mm | ||
12 | Slitting straighten tolerance | 0.2mm/m |
13 | The slitting burr | length than 0.05mm |
14 | Min. slit width | 30mm |
15 | The slit strip quantity | 20 strips |
16 | The waste edge | 3~15mm |
17 | The quantity of waste edge | 2 strips |
18 | The max. weight of waste edge | less than 150kgs/roll |
19 | The main power | 220KW |
20 | The weight of the line | about 68T |
21 | The dimension of the line | 25000mm*8500mm |
3. Komponenten und Funktionen:
1 | Supporte table | supported the material steel coil, in order that the coil car can feed the coil into the hydraulic un-coiler |
2 | Coil car | made of the coil car main body, V elevator, lifting oilcan, lifting post. And main motor, reducer and train transfer equipment, and railway with the function lifting and moving |
3 | Hydraulic uncoiler with both head | consist of the frame and railway and hydraulic cylinder, washer, hydraulic oilcan |
4 | Guiding equipment | consists of flexing supporter panel and oilcan |
5 | Rectify equipment | consists of one stand of rolls, and can adjust the rolls distance to adapt to different thickness |
6 | Shearing equipment | can cutting at the length when you need |
7 | Middle bridge 1# | guiding the sheet when the sheet twists |
8 | Fix the width equipment | limited rolls mainly adjust the width from 500mm to 1600mm, and fixed, and limited the sheet out the limited rolls when at high speeed |
9 | Slitting equipment | consist of the fixtable base and movablebase, the up and down khifeshaft, the equipment of lifting the up knife shate, and fix the shaft equipment |
10 | The knife shaft diameter | 240mm |
the knife diameter:350mm | ||
main power" 75kw | ||
11 | The end press of the coil equipment | press the coil when slitting will be finished |
12 | The waste side re-coiler | re-coiler the waset side after slitting |
13 | Middle bridge 2# | reduce the speed difference at different equipment |
14 | Separate equipment | consist of separate rolls and its base, in order that every strip go ahead in their orbit |
15 | Re-coiler equipment | finish recoiling the strips slitted |
16 | Main power | 90kw |
17 | Hydraulic supporter | support the re-coil shaft to get more capacity |
18 | The un-load coil car | it is near the un-coiler car |
19 | Hydraulic pneumatic system | consist of motor, oil pump, hydraulic value, oiltank, oilcan, hydraulic pipe, cylinder, and value, control the whole line hydraulic move |
20 | Hydraulic power | 11kw |
21 | Oil pump | PV1-23(the speed is 33L/MIN) |
22 | System pressor | 14Mpa, air original pressor 0.7Mpa(0.93m/min) and the air original is provided by the buyer |
23 | Electric control | consist of the standard electric box, main control panel, vice control panel and the switch box. The whole line is under control, the main control panel can control the slitting speed, and spot slitting and continuous slit. |
Produktgruppe : Schlitz- und Schneidemaschine
Premium Related Products
andere Produkte
heiße Produkte
Farbe Stahldachziegel / Farbe / verzinktes Wellblechblech / MetallfliesenblechQuadratische WasserrohrmaschineAutobahn-Leitplanke-Umformmaschine, Autobahn-Leitplanke-UmformmaschinePolyurethan-Sandwich-PlatteEPS Sandwich PanelZ Purlin MaschineDecking PanelEPS-geschäumte PlastikmaschineRollenformmaschineRollenformmaschine, Umformmaschine, RollenformerStahlprägemaschineStahlstrukturSchnitt zu LängenlinieSchermaschineHydraulische AbwicklermaschineUmformmaschine